The Basics on Replacement Projector Bulbs

There is one thing about projectors that is partly good and partly bad. The makers stress on the supreme quality and durability of their products, saying that it is maintenance free, but add a disclaimer that it is very important to keep them in top working condition. Chances of a likely replacement projector lamps are significantly high, unless you maintain the unit properly. It’s high time you thought about projector replacement bulbs. Otherwise, you could see a warning indicator go off from nowhere, signalling the end of life of your current bulb.

 

Here is a collection of useful tips that will come in handy if you choose to buy projector replacement bulbs, and repair it yourself. Replacement projector lamps could be slightly risky, so do not attempt unless you know what’s what.

 

High pressure lamps which use mercury as primary light source, when not handled properly, may explode. Yes, mercury is a very heavy metal, and could wreak havoc on your surroundings just in case the pressure soars up beyond control.  As I said before, mercury is a heavy substance, as is Xenon, and projector lamps made out of these substances may cause serious damage when the pressure built inside the unit goes out of control. So, the rule of thumb is to exercise extreme care when handling a new lamp. Improper techniques of handling may pose a great threat to its life, so make sure that projector replacement bulbs remain unscathed right until the instant they take their place inside the unit. You don’t want to reduce the life of your projector lamp. Do you?

 

Before you take out the bulb from the holder, ensure that it cools down a lot and check if it is still hot in it. The product handbook will perhaps tell you how longer you need to wait till it cools down. For this reason it is sensible to maintain these instructions.

 

Make sure the filter is cleaned properly while replacing the lamp. Failure to do so might bring about loss of clarity, effecting a significant dip in…

Read the full article from the Source…

Back to Top